Welding Guide and Books
You can find also information on Welding Nickel Alloys, Welding Stainless Steel Welding Copper Alloys, Welding Aluminium
- Fabricators' & Erectors' Guide to Welded Steel Construction
- Mentoring Series
- Weld Quality Series
- Key Concepts in Welding Engineering
- Design File: Practical Ideas for the Design Professional
- Carefully Evaluate Code Requirements
- Consider Direction of Loading When Sizing Fillet Welds
- Consider Penetration When Determining Fillet Weld Size
- Fillet Welds That Are Too Long
- Thicker Steel Permits the Use of Opposing Arcs
- Use Caution When Specifying Seal Welds
- Use Undermatching Weld Metal Where Advantageous
- Watch Out for Nothin' Welds
- Mixing Welds and Bolts, Part 1
- Designing Welded Lap Joints
- Designing Fillet Welds for Skewed T-Joints, Part 1
- Mixing Welds and Bolts, Part 2
- Pay Attention to Tack and Temporary Welds
- The Challenge of Welding Jumbo Shapes
An online course on filler metal welding (ESAB)
This booklet is a guide to welding pipe with Shielded Metal Arc Welding (SMAW) and double ending pipe using automatic welding. Lincoln Electric supplies electrodes, power sources, automatic and semiautomatic wire feeders, submerged arc wire and flux, which are the industry standards for pipeline construction around the world. Semiautomatic, self-shielded flux-cored Innershield® Process is being used around the world to produce high quality, low hydrogen, reliable, lower cost pipeline welds.
This site from TWI - The Welding Institute contains tuttorials on Welding and Materials Fabrications:
Cutting and gouging
Health, safety and accident prevention
Standards and classifications
Weldability and joining of materials
Welding defects and distortion
Welding equipment
Welding processes - arc
Welding processes - others
Mechanical testing
Miller Welding:
This volume from NAVY is a self-study course on:
Properties and Uses of Metals
Basic Heat Treatment
Introduction to Welding
Gas Cutting
Gas Welding
Soldering, Brazing, Braze Welding
Wearfacing Shielded Metal-Arc Welding
Wearfacing Gas Shielded-Arc Welding
Steelworker, Volume 2
This volume from NAVY is a self-study course on:
Technical Administration Layout and Fabrication of Sheet Metal and Fiberglass Duct Structural Terms/Layout and Fabrication of Structural Steel and Pipe Fiber Line Wire Rope Rigging Reinforcing Steel Pre-engineered Structures: Buildings, K-Spans, Towers, and Antennas Pre-engineered Storage Tanks Pontoons Pre-engineered Structures: Short Airfield for Tactical Support Steelworker Tools and Equipment
Process Modeling -- E-Weld Predictor
This Process Modeling tool will allow you to predict thermal cycles, residual stress and distortion in multipass welds made on plate and pipe geometries for steels, nickel and titanium alloys.
Materials
Modeling
Materials Modeling provides access to published
models about materials microstructure development as a function of composition
in steels and stainless steels.
Performance
Modeling
Performance Modeling provides access to published
models related to performance of materials and welds as a function of
microstructure and property gradients.